Hoya 82mm 80B Filter

Hoya 82mm 80B Filter

The Hoya 82mm 80B Hoya Multi-Coated (HMC) Glass filter is blue. It is used to balance daylight film under artificial, tungsten, or standard (household) incandescent lighting.

You've been given the assignment to do some slide copying on a copy stand. Unfortunately, you only have daylight film and you notice that the copy stand is loaded with 3400K photofloods. Not to worry! An 80B is a strong dark-blue filter that will balance your colours back to reasonable normality. This filter can also be used as a "conversion" filter for when you are shooting in a room with incandescent light (household light bulbs) and daylight film.

This filter allows you to "balance", i.e. bring back, correct colour tone to your images. There is some loss of film speed that may require the use of a tripod but, at least, your photos will demonstrate the proper tonality they so richly deserve.

Hoya makes the 80 series of filters in many sizes to accommodate the many uses this filter has. This filter should be used by the pro and amateur alike - weekend photo warrior or pro cinematographer and must be considered an essential addition to any photo arsenal.

Multi-coated to minimize reflection at the filter surfaces which reduces flare and ghosting.

Features:

As one of the premier filter manufacturers, Hoya filters continue to be made from quality glass assuring the photographer clear, sharp, and accurate images

Hoya filters consistently provide even colour through the filter; All surfaces are ground and polished to specific thickness and tolerances

Even non-multi-coated Hoya filters have one layer of anti-reflective coating applied to each surface of the glass; Hoya's single layer coating decreases light reflection off the surface from approx. 9% to an average of 4-5%

80 Series colour Conversion Chart

80A increases colour temperature from 3200-5500° Kelvin (commonly used with 3200K lamps)

80B increases colour temperature from 3400-5500° Kelvin (commonly used with photoflood lamps)

80C increases colour temperature from 3800-5500° Kelvin (commonly used with flashbulbs)

80D increases colour temperature from 4100-5500° Kelvin (commonly used to remove extreme orange or red)