Miller Versa CXV10 Head, Toggle 2-Stage Alloy Tripod, Ground Spreader & Soft Case Kit

Miller Versa CXV10 Head, Toggle 2-Stage Alloy Tripod, Ground Spreader & Soft Case Kit

The Versa CXV10 Head, Toggle 2-Stage Alloy Tripod, Ground Spreader & Soft Case Kit from Miller includes the Versa CXV10 fluid head, a pan handle, a quick release plate, the Toggle 10 cm 2-stage alloy tripod legs, a ground spreader, a rubber foot set, and a soft carry case.

The Versa CXV10 head is designed to accommodate a payload up to 12 kg and has 16 steps of counterbalance with CB Plus, a quick release plate with 10 cm of sliding range to balance your rig, a 10 cm ball base, an illuminated bubble level, and a fixed length pan handle. The 2-stage legs are made from durable alloy and have a 54 to 171 cm height range, a ground spreader, removable rubber feet, a 10 cm bowl, and a 84 cm transport length.

Miller Versa CXV10 Fluid Head with Pan Handle

The Versa CXV10 Fluid Head with Pan Handle from Miller is designed to accommodate a wide payload range, 16 steps of counterbalance with CB Plus for fine adjustments, as well as five selectable pan/drag settings. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest cameras to be supported. Maxed out, this head is rated to support camera setups up to 12 kg, adequate for a DSLR or mirrorless camera, a cinema camera, or an ENG camcorder. Securing your camera or rig is easy. The sideload quick release plate design enables you to simply drop in your camera without the alignment issues posed by rear-loading variations. The plate offers 10 cm of sliding range to balance your rig.

To survive fast-paced shooting environments, the CXV10 is die-cast from a lightweight yet durable metal alloy with composite polymers and precision ball bearings for smooth mechanical operation. Even in harsh conditions, the CXV10 will perform reliably. The base of the CXV10 is a 10 cm ball for mounting to compatible tripods and grip equipment. An illuminated bubble level makes it easy to level the CXV10 in dark environments. A fixed-length pan handle is included, and a second rosette is available for attaching an optional second pan handle.

Miller Sprinter II 2-Stage Alloy Tripod (Ground Spreader Ready)

The Miller Sprinter II 2-Stage Alloy Tripod is a quick-setup solution for a tripod head with 10 cm ball base. Its light weight, flip-locks, and rigid construction allow for durability without compromising usability in ENG, EFP, and other pro video applications. Unlike many traditional multi-stage designs, both flip-locks are located on the same section for easy reaching, no matter the height setting. The fast setup is complemented by an in-line carry handle, for portability on set or in the field. Compatible spreaders, rubber feet, and dollys are available separately.

Miller 470 Ground Spreader for Sprinter II Tripod Legs

The Miller 470 Ground Spreader works with all Sprinter II tripod legs. The spreader features pullover rubber stirrups that securely hold your tripod's feet, holding your legs fast while providing grip on hard surfaces. Once mounted, you can adjust the length of each of the spreader's arms individually as needed without detaching the spreader from the tripod. The spreader's flexible construction enables your tripod to remain stable on flat or uneven terrain. A pull ring in the center of the spreader helps fold the spreader up into your tripod when you close the legs.

Suits all Sprinter II single- and two-stage tripods

Telescopic arm extensions

Flexible spreader consturction makes it suitable for flat and uneven terrain

Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)

The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid level spreader.

Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)

Store, transport, and protect your gear with the black Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems. The case features zipper closure, top and bottom cradles with straps to secure your tripod, and back pack straps with a storage pocket. For strength and durability, the case is constructed with a ballistic nylon shell and hard plastic skid pads. Carry the case with the dual strap handles or padded grab handle. You can also attach a sold-separately shoulder strap to the case D-links. An external pocket and card holder makes case identification easier.

Key Features:

Versa CXV10 Fluid Head with Pan Handle

Toggle 10 cm 2-Stage Alloy Tripod

Ground Spreader, Rubber Feet, Case

What's in the Box

Miller Versa CXV10 Fluid Head with Pan Handle

Quick Release Sideload Plate

Pan Handle

Miller Sprinter II 2-Stage Alloy Tripod (Ground Spreader Ready)

Miller 470 Ground Spreader for Sprinter II Tripod Legs

Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)

Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)

Back Pack Straps