Miller Air Toggle LW Alloy System
Miller Air Toggle LW Alloy System
The Miller AIR Toggle LW Alloy System includes the AIR Fluid Head, DS Aluminium 1-Stage Lightweight Tripod Legs, Non-Adjustable Above-Ground Tripod Spreader, Rubber Feet for Select Tripods (set of three), and Soft Tripod Case for DS 1-Stage Systems.
The AIR Fluid Head is constructed of lightweight high-strength die cast alloy and rigid composite polymers, incorporating advanced precision fluid drag and two positions of counterbalance. It is capable of handling a wide range of payloads, from 2 to 5 kg. The DS Aluminium 1-Stage Lightweight Tripod is designed with single or two-stage legs, and made of aluminium alloy or carbon fiber material. It offers a 75 or 100mm bowl fixing, attached to a ball-leveling mount that ensures bowl-to-leg fastening, resists loosening, and eliminates joint instability. A Non-Adjustable Above-Ground Tripod Spreader is essential when shooting on uneven surfaces, such as steps, rocky ground, and slopes. It allows for rapid setups, and it pulls down by keeping tripod legs at an equal or preset distance relative to each other. The set of three Rubber Feet snap onto your tripod's spiked feet, providing stable, non-slip support. And the Soft Tripod Case is padded and designed for the Miller DS single stage tripod systems.
Miller AIR Fluid Head
The Miller AIR Fluid Head is a lightweight fluid head for the videographer on the go. Designed for cameras between 2 and 5 kg, this die-cast aluminium alloy and rigid composite polymers head is dust and moisture sealed for smooth operation in harsh environments. The sliding camera plate allows 2.36" of balance adjustment, has screw slots, and it comes with a 1/4"-20 and 3/8"-16 camera tie-down screw as well as a combination 1/4-20 screw with locating pin.
Two-steps of counterbalance help you tune the AIR Fluid Head to match the needs of the shot. The fixed pan and tilt drag remains consistent throughout the head's operating temperature range of -40 to 149°F, and each axis has its own independent lock. Featuring a 75mm half-ball leveling base you can use this head with 75mm bowl base tripod legs, or remove the ball leveling stud for flat-base mounting.
Miller fluid head pan and tilt technology
Suitable for payloads between 2 to 5 kg
Built for rugged outdoor shooting conditions
Removable stud allows the head to be mounted on a solopod and slider via a 3/8" thread
Optional second pan handle mount
Miller Toggle 75 1-Stage Alloy Tripod (Mid-Level Spreader Ready)
The Miller Toggle 1-Stage Alloy Tripod is designed to be a compact yet sturdy platform for your 75mm ball-base fluid head. The single-stage design allows for a 24.4 to 52.4" height range while maintaining a folded length of 32.7". Each stage features its own rotary clamp for secure locking, enabling support for payloads up to 25 kg. Compatible spreaders, rubber feet, and dollies are available separately.
Miller 835 Non-Adjustable Above-Ground Tripod Spreader - for 440 Tripod
A Mid-Level Spreader is chosen when shooting is often performed on uneven surfaces, such as steps, rocky ground, slopes. It allows for rapid set-up and pull down by keeping tripod legs at an equal or preset distance relative to each other. Attaches to the center bracket of a tripod and folds down within tripod without having to take it off.
Speedy set-up for all lightweight tripods
Quick release attachment pins
Integrated in DS5 and DS10 systems with lightweight tripods
Miller 550 Rubber Feet Pads for Select Tripods (Set of 3)
The 550 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods featuring 835 and 508 above ground spreaders.
Miller 874 Soft Tripod Case - for DS 1-Stage Systems (Except with HD Tripod)
The Miller 874 Soft Tripod Case is a padded tripod carry case designed for the Miller DS single stage tripod systems. It has rigid sidewalls sandwiched between high density foam padding and a head-end cradle to protect the tripod and fluid head from heavy bumps during flight and vehicle transport. It has a weatherproof Cordura construction with heavy duty zippers on the bag and the interior pocket. The case is carried by either the padded interlocking carry straps or the padded shoulder strap.
1000 denier water-resistant Cordura fabric
Rigid sidewalls sandwiched between high density EVA foam padding
Head-end cradle protects fluid head from heavy bumps during flight and vehicle transport
Padded interlocking carry straps and padded shoulder strap
1 Interior accessory pocket
Heavy duty zippers on bag and pocket
ID window
Compatible with
Miller DS single stage system tripod
What's in the Box:
Miller AIR Fluid Head
Miller Standard Camera Plate for AIR, DS10, DS20, Compass, CompassX Heads (2.4")
Pan Handle
Miller Toggle 75 1-Stage Alloy Tripod (Mid-Level Spreader Ready)
Miller 835 Non-Adjustable Above-Ground Tripod Spreader - for 440 Tripod
Miller 550 Rubber Feet Pads for Select Tripods (Set of 3)
Miller 874 Soft Tripod Case - for DS 1-Stage Systems (Except with HD Tripod)
Padded shoulder strap
Call us during business hours at 02 9299 0177.
Chat live with our team on-site.
Or email us anytime at info@georges.com.au with the subject "Awaiting Arrival"
Request a Price Match
Fill out the price match form below, and we will be in touch shortly.

Lexar Professional Silver 128GB SDXC UHS-II 250MB/s Memory Card - V60
$65.34

Lexar Professional Silver 64GB SDXC UHS-II 250MB/s Memory Card - V60
$44.00

Lexar Professional Gold Series 128GB SDXC UHS-II 280MB/s Memory Card - V60
$87.00

Lexar Professional Silver 128GB SDXC UHS-I 160MB/s Memory Card - V30
$45.00

Lexar Professional Silver 256GB SDXC UHS-II 250MB/s Memory Card - V60
$127.05

Lexar Professional Gold 160GB CFexpress Type A 900MB/s Memory Card
$302.50
Collapsible content
Miller Air Toggle LW Alloy System
The Miller AIR Toggle LW Alloy System includes the AIR Fluid Head, DS Aluminium 1-Stage Lightweight Tripod Legs, Non-Adjustable Above-Ground Tripod Spreader, Rubber Feet for Select Tripods (set of three), and Soft Tripod Case for DS 1-Stage Systems.

Need advice?
Speak to one of our dedicated Australian-based sales team members.
Request a Price Match
Fill out the price match form below, and we will be in touch shortly.