Wooden Camera Sony F55/F5 Unified Accessory Kit (Advanced)
Wooden Camera Sony F55/F5 Unified Accessory Kit (Advanced)
The Sony F55/F5 Unified Accessory Kit (Advanced) from Wooden Camera is a camera support kit designed for the Sony F55 & F5 Cameras and utilizes the Unified Baseplate System. The kit includes Top Plate, Unified Baseplate, two 15mm Rods, Top-Handle (cheese), Safety Dovetail (8”), NATO Cheese Handle kit (70mm), and Sony F55/F5 Cable Protector, and Sony EVF Bracket.
The top plate is a camera cheese plate for secure accessory attachment, while the unified baseplate is a quick-release camera baseplate for holding the two included 15” long 15mm rods at the correct lens height. The top cheese handle is a bolt-on top handle that attaches to the top plate for secure camera carrying. The Sony F55/F5 Cable Protector provides EVF cable protection, and the Sony EVF Bracket allows attachment of the original Sony viewfinder mount.
The 8” long safety dovetail interfaces with the ARRI dovetail slot on the bottom of the unified baseplate. The NATO handle kit (Plus, 70mm) is a quick release top handle that attaches to the top plate and multiple mounting points for accessories.
Wooden Camera Top Plate for Sony F55 & F5 Cameras
The Wooden Camera Top Plate is a top cheese plate for the Sony F55 and F5 Cameras that contours to the shape of the camera body and leaves the vent area open. Hence, the original Sony focus hook can remain attached to the camera. The stopper screw in the front prevents accidental unlocking of the FZ mount. The plate provides rows of 1/4"-20 and 3/8"-16 holes for attaching handles, UVF Mount v2, rod clamps, and more. Additional screw holes allow attachment of the original Sony F55 handle.
Features:
1/4" threads in standard spacing (9mm centre to centre)
3/8" threads in ARRI standard spacing (50mm centre to centre)
Wooden Camera Unified Baseplate for URSA Mini, F55, F5
The Wooden Camera Unified Baseplate supports 15mm LWS rods at the correct lens height, and it offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit. This Kit allows you to support different lens adapters from Wooden Camera, Metabones, and other brands.
The Baseplate includes the Core Unit, a Lower Quick Dovetail tripod plate on the bottom, and a Dovetail Camera Plate for the Blackmagic URSA Mini and Sony F55/F5. Other Unified Baseplate Dovetail Plates are also supported, allowing for quick swaps with a variety of cameras.
The Baseplate provides two quick release options. You can remove the Dovetail Camera Plate only and leave the Core Unit with your rod pair behind, or you can remove the Core Unit from the Lower Quick Dovetail, in which case you'll have a dovetail on the bottom of the Core Unit that's compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig.
The Dovetail Camera Plate features a long slot along its centre that lets you secure it to the camera with multiple screws (included), which can be set up to 2.8" (70mm) apart. It also has a non-slip rubber surface that will prevent the camera from twisting.
The Dovetail Camera Plate has an ARCA Swiss standard dovetail compatible with many third-party products. It also has threaded 1/4"-20 threaded holes on the bottom for attaching to gimbals or other compatible tripod plates. The Lower Quick Dovetail has 1/4"-20 and 3/8"-16 threaded holes for attaching to tripod plates or ARRI standard bridge plates, such as the Wooden Camera Unified Bridgeplates.
The Unified Baseplate can also be upgraded for VCT-14 compatible mounting options. Simply attach it to the optional Unified VCT Wedge Plate, which can then be mounted on the Unified VCT-14 Tripod Plate, also sold separately. The Unified Baseplate is backward compatible with Wooden Camera's original Quick Dovetails (Standard, DSLR, and Large).
Features:
Supports 15mm LWS rods at the correct lens height
Offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit (for lens adapter support)
Includes the Core Unit, Lower Quick Dovetail tripod plate, and Dovetail Camera Plate
Two quick-release options—remove Core Unit or remove Dovetail Camera Plate
Core Unit features a dovetail on the bottom, compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig
Dovetail Camera Plate features an ARCA Swiss standard dovetail and threaded holes for attaching to gimbals or other compatible tripods plates
Lower Quick Dovetail offers threaded holes for attaching to tripod plates or ARRI standard bridge plates
A long slot along the centre allows multiple screws to be attached to the camera, set up to 2.8" (70mm) apart
Anti-twist, non-slip rubber surface
Upgradable for VCT-14 compatible mounting options
Additional Lower Quick Dovetail and Dovetail Camera Plates can be purchased for quick swap capability
Backward compatible with original Wooden Camera Quick Dovetail
Wooden Camera 15mm Support Rod (15")
This is a single, 15" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off and has a hollow interior providing maximum strength.
Wooden Camera Safety Dovetail Plate (8")
The 8" Safety Dovetail Plate from Wooden Camera is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. It features threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. The dovetail can be attached to a shoulder pad for custom handheld configurations.
Wooden Camera NATO Cheese Handle Kit (70mm)
The 70mm NATO Cheese Handle Kit from Wooden Camera is designed for quick release attaching and detaching on the camera without screws. To attach the handle, you can simply slide it onto a Safety NATO Rail and tighten down the thumbscrew. The cheese grip provides mounting points for additional accessories.
The 70mm NATO standard quick-release rail attaches to any two 1/4"-20 holes to provide a mount for NATO Handles and NATO Clamps. It features spring-loaded pins on each end to prevent accidental accessory removal. It is compatible with RED and third party NATO style accessories.
Features:
Cheese grip with 19mm opening at the rear
Arrays of 1/4"-20 and 3/8"-16 holes provide mounting points for additional accessories
Wooden Camera Sony F55/F5 EVF Cable Protector
Install the Wooden Camera Sony F55/F5 Cable Protector to protect your camera's delicate EVF cable from being bumped while it is plugged in. While the metal surround protects the cable, it does not impede the cable release levers, so you can still easily detach the cable when necessary. Included with the cable protector are screws for attaching the protector with or without a top plate installed on your camera.
Wooden Camera Sony EVF Bracket
The Sony EVF Bracket from Wooden Camera allows the attachment of an original Sony viewfinder mount. It can be attached to the front of the Top Handle or NATO Handle by using 2 screws.
Note: Sony viewfinder mounts can be found on Sony F55/F5 handles or older Sony Beta cams.
Request a Price Match
Fill out the price match form below, and we will be in touch shortly.
Product Overview
Wooden Camera Sony F55/F5 Unified Accessory Kit (Advanced)
The Sony F55/F5 Unified Accessory Kit (Advanced) from Wooden Camera is a camera support kit designed for the Sony F55 & F5 Cameras and utilizes the Unified Baseplate System. The kit includes Top Plate, Unified Baseplate, two 15mm Rods, Top-Handle (cheese), Safety Dovetail (8”), NATO Cheese Handle kit (70mm), and Sony F55/F5 Cable Protector, and Sony EVF Bracket.
Need advice?
Speak to one of our dedicated Australian-based sales team members.