Wooden Camera Canon C300mkII Unified Accessory Kit (Pro)

Wooden Camera Canon C300mkII Unified Accessory Kit (Pro)

The Canon C300mkII Unified Accessory Kit (Pro) from Wooden Camera is designed for the Canon 300mkII camera. The C300mkII accessory package includes a Top Plate, NATO Handle Kit (Cheese, 70mm), Unified Baseplate, two 15mm Rods (15"), UVF Mount v2, Safety Dovetail (12"), Rod Clamp (15mm LW), and Battery Slide.

The Top plate for the Canon C300mkII camera features an array of 1/4-20" holes in standard 9mm spacing. It has multiple 3/8-16" holes for large accessories and ARRI standard accessories mount on top and on the sides. It includes a Universal Hot Shoe for attaching the Canon C300mkII LCD Unit.

The 70mm NATO Cheese Handle Kit is designed for quick-release attaching and detaching on the camera without screws. To attach the handle, you can simply slide it onto a Safety NATO Rail and tighten down the thumbscrew. The cheese grip provides mounting points for additional accessories.

The Unified Baseplate is designed for use with the Sony FS7, Canon C100mkII, C300mkII, C100, C300, and C500 cameras. It is a quick-release baseplate that provides lightweight 15mm rod support at the correct lens height. 15mm rods pass through front to back and have 2 locking thumbscrews per side.

The two 15mm Single Support Rods (15") are used for mounting accessories including follow focus systems, matte boxes, lens supports, and servo motors.

The UVF Mount V2 NATO Rail Kit enables you to attach and adjust a viewfinder on a rig. A mounting bracket for viewfinders is included. Most viewfinders are compatible. The bracket attaches to the NATO rail of the kit.

The 12" Safety Dovetail Plate is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment.

The 15mm Rod Clamp attaches to 15mm rods to add 1/4"-20 screw-holes to your camera rig. Among the variety of accessories that can be mounted to these screw-holes is Wooden Camera's QB Battery Back Plate.

The Battery Slide is an adjustable mounting system for V-mount and Gold mount battery plates. Applying firm pressure tilts the plate in place. Loosen the thumbscrew to slide the plate up and down and also tilt.

Wooden Camera Top Plate for Canon C300 Mark II Camera

Mount an EVF, a handle, or another accessory to the top of your C300 Mark II camera with this Wooden Camera Top Plate. Threaded 1/4"-20, 3/8"-16, and ARRI standard tapped holes are available on the top and sides for versatile accessory placement. All necessary mounting hardware is included, as is a shoe mount for mounting Canon's LCD unit.

Wooden Camera NATO Cheese Handle Kit (70mm)

The 70mm NATO Cheese Handle Kit from Wooden Camera is designed for quick release attaching and detaching on the camera without screws. To attach the handle, you can simply slide it onto a Safety NATO Rail and tighten down the thumbscrew. The cheese grip provides mounting points for additional accessories.

The 70mm NATO standard quick-release rail attaches to any two 1/4"-20 holes to provide a mount for NATO Handles and NATO Clamps. It features spring-loaded pins on each end to prevent accidental accessory removal. It is compatible with RED and third party NATO style accessories.

Features:

Cheese grip with 19mm opening at the rear

Arrays of 1/4"-20 and 3/8"-16 holes provide mounting points for additional accessories

Wooden Camera Unified Baseplate for FS7, FX9, C100 Mk II, C300 Mk II, C100/C300/C500

The Wooden Camera Unified Baseplate supports 15mm LWS rods at the correct lens height, and it offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit. This Kit allows you to support different lens adapters from Wooden Camera, Metabones, and other brands.

The Baseplate includes the Core Unit, a Lower Quick Dovetail tripod plate on the bottom, and a Dovetail Camera Plate for the Sony FS7/FX9, Canon C100 Mk II, C300 Mk II & C100/C300/C500. Other Unified Baseplate Dovetail Plates are also supported, allowing for quick swaps with a variety of cameras.

The Baseplate provides two quick release options. You can remove the Dovetail Camera Plate only and leave the Core Unit with your rod pair behind, or you can remove the Core Unit from the Lower Quick Dovetail, in which case you'll have a dovetail on the bottom of the Core Unit that's compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig.

The Dovetail Camera Plate features a long slot along its centre that lets you secure it to the camera with multiple screws (included), which can be set up to 2.8" (70mm) apart. It also has a non-slip rubber surface that will prevent the camera from twisting.

The Dovetail Camera Plate has an ARCA Swiss standard dovetail compatible with many third-party products. It also has threaded 1/4"-20 threaded holes on the bottom for attaching to gimbals or other compatible tripod plates. The Lower Quick Dovetail has 1/4"-20 and 3/8"-16 threaded holes for attaching to tripod plates or ARRI standard bridge plates, such as the Wooden Camera Unified Bridgeplates.

The Unified Baseplate can also be upgraded for VCT-14 compatible mounting options. Simply attach it to the optional Unified VCT Wedge Plate, which can then be mounted on the Unified VCT-14 Tripod Plate, also sold separately. The Unified Baseplate is backward compatible with Wooden Camera's original Quick Dovetails (Standard, DSLR, and Large).

Features:

Supports 15mm LWS rods at the correct lens height

Offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit (for lens adapter support)

Includes the Core Unit, Lower Quick Dovetail tripod plate, and Dovetail Camera Plate

Two quick-release options—remove Core Unit or remove Dovetail Camera Plate

Core Unit features a dovetail on the bottom, compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig

Dovetail Camera Plate features an ARCA Swiss standard dovetail and threaded holes for attaching to gimbals or other compatible tripods plates

Lower Quick Dovetail offers threaded holes for attaching to tripod plates or ARRI standard bridge plates

A long slot along the centre allows multiple screws to be attached to the camera, set up to 2.8" (70mm) apart

Anti-twist, non-slip rubber surface

Upgradable for VCT-14 compatible mounting options

Additional Lower Quick Dovetail and Dovetail Camera Plates can be purchased for quick swap capability

Backward compatible with original Wooden Camera Quick Dovetail

Wooden Camera 15mm Support Rod (15")

This is a single, 15" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off and has a hollow interior providing maximum strength.

Wooden Camera UVF Mount V2 NATO Rail Kit

The Wooden Camera UVF Mount V2 NATO Rail Kit enables you to attach and adjust a viewfinder on a rig. A mounting bracket for viewfinders is included. Most viewfinders are compatible. The bracket attaches to the NATO rail of the kit. The NATO rail features industry-standard dimensions, so any NATO-compatible bracket is interchangeable with the included one. An adapter for using Alphatron viewfinders and SmallHD viewfinders/LCDs comes included.

The NATO rail, the mounting bracket, a 15mm tube clamp, and a 15mm rod are the parts of the kit. The clamp attaches to two 1/4" threads spaced between 25 and 36mm apart and it holds the rod. And the NATO rail connects onto to the rod. A safety pin at the end of the rail will prevent the viewfinder mounting bracket from being accidentally removed.

Three Points of Adjustment

Rod rotates inside the clamp

Rod adjusts horizontally along with the clamp

Optional viewfinder mounting bracket tilts on NATO rail

Some Compatible Viewfinders

Alphatron

Cineroid

RED

SmallHD

Zacuto

Wooden Camera Safety Dovetail Plate (12")

The 12" Safety Dovetail Plate from Wooden Camera is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. It features threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. The dovetail can be attached to a shoulder pad for custom handheld configurations.

Wooden Camera 15mm Rod Clamp

The Wooden Camera 15mm Rod Clamp attaches to 15mm rods to add 1/4"-20 screw-holes to your camera rig. Among the variety of accessories that can be mounted to these screw-holes is Wooden Camera's QB Battery Back Plate. This plate comes in different versions, each designed to have a different type of battery plate and ultimately battery attached to it. With these attached, the QB Battery Back Plate can be mounted right onto the screw-holes of the Rod Clamp. The ability to attach so is especially useful when you have no way of mounting a battery directly onto your camera and as an alternative are looking for a way to get the battery near the camera (so you can connect the two).

Wooden Camera Battery Slide

The Battery Slide from Wooden Camera is an adjustable mounting system for V-Mount, Gold Mount, QRC Gold Mount, and RED/BLUESHAPE battery plates. Multiple rows of pass-through holes allow the attachment of rod clamps, cheese plates, and other accessories.

In order to adjust the plate's position, the user only needs to apply firm pressure to tilt it into place. Sliding the plate into position is facilitated by an adjustable thumbscrew. Both these movements make the plate ideal for adjusting counterbalance and transitioning from studio to handheld position.

Learn more