{"product_id":"sachtler-system-aktiv6-flowtech75-ms-scs2064s-ftms","title":"Sachtler System aktiv6 flowtech75 MS","description":"\u003ch3\u003eSachtler System aktiv6 flowtech75 MS\u003c\/h3\u003e\n\u003cp\u003eThe aktiv6 flowtech75 MS Tripod System from Sachtler pairs the activ6 fluid head with the lightweight carbon fiber flowtech 75 MS tripod with mid-level spreader. This kit offers lightning-fast SpeedSwap technology, a sideload camera plate, smooth panning and tilting, and stable support for camera rigs weighing up to 7.98 kg. A padded carrying bag rounds out this tripod kit.\u003c\/p\u003e\n\u003ch3\u003eSachtler aktiv6 Sideload Fluid Head with SpeedLevel \u0026amp; 3-Step Drag for Sachtler Tripods (75mm)\u003c\/h3\u003e\n\u003cp\u003eThe aktiv6 Sideload Fluid Head uses Sachtler's truly innovative SpeedLevel technology to provide almost instant mounting and leveling of your camera rig on Sachtler 75mm tripod legs. The clamp and stud SpeedLevel system saves precious time leveling your camera rig by eliminating the need to screw on a tie-down knob. Designed for DSLRs, mirrorless, and digital cine-style cameras, the aktiv6 supports rigs weighing up to 17.6 pounds. This fluid head features 15 steps of counterbalance and three steps of pan and tilt drag adjustment, plus zero settings for both balance and drag.\u003c\/p\u003e\n\u003cp\u003eThe SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or other mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.\u003c\/p\u003e\n\u003cp\u003eWhen used with a separately available flowtech tripod, the activ6 enables you to spread the legs flat, getting as low to the ground as your head can without a tie-down knob getting in the way. You can also mount your head directly onto a slider using a separately available aktiv system stud that screws onto support systems with a 3\/8\"-16 threaded stud.\u003c\/p\u003e\n\u003cp\u003eThe PrismBubble level system is pressed once to illuminate the bubble level to be illuminated or pressed twice to light up both the bubble level and the drag settings, a boon when working in darker environments. The bubble level also has a built-in prism, enabling you to more easily level the head when the legs are at set at maximum height or an awkward angle.\u003c\/p\u003e\n\u003cp\u003eMount your camera using the aktiv6 sliding balance plate with 1\/4-20\" screw and locating pin. With a sliding range of 4.7\", this head adapts quickly to balance variously configured rigs. The Sachtler aktiv6 head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.\u003c\/p\u003e\n\u003ch3\u003eSachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet\u003c\/h3\u003e\n\u003cp\u003eThe Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet eschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs work weigh just under 7 pounds yet they can support a payload of up to 44 pounds, and extend from a minimum height of 24\" to a maximum height of 61\" when using the included removable mid-level spreader. Each leg features a single clamping lever that locks and unlocks the sections.\u003c\/p\u003e\n\u003cp\u003eEach leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground, and you can snap rubber feet onto the dual spikes for better grip when working on hard or delicate surfaces.\u003c\/p\u003e\n\u003ch3\u003eSachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head\u003c\/h3\u003e\n\u003cp\u003eWith dimensions of 36.6 x 7.9 x 9.1\", this Padded Bag from Sachtler is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.\u003c\/p\u003e\n\u003cp\u003eThe bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cp\u003eaktiv6 Fluid Head with SpeedLevel Technology\u003c\/p\u003e\n\u003cp\u003eLightweight Carbon Fibre Tripod Construction\u003c\/p\u003e\n\u003cp\u003eSupports Camera Rigs up to 7.98 kg\u003c\/p\u003e\n\u003cp\u003eLightning-Fast SpeedSwap Technology\u003c\/p\u003e\n\u003cp\u003eSmooth Pan and Tilt Drag Adjustment\u003c\/p\u003e\n\u003cp\u003e15-Step Counterbalance Adjustment System\u003c\/p\u003e\n\u003cp\u003eThree-Step Pan and Tilt Drag\u003c\/p\u003e\n\u003ch3\u003eWhat's in the Box:\u003c\/h3\u003e\n\u003cp\u003eSachtler System aktiv6 flowtech75 MS\u003c\/p\u003e\n\u003cp\u003ePan Bar\u003c\/p\u003e\n\u003cp\u003eSideload Plate with 1\/4\"-20 Screw\u003c\/p\u003e\n\u003cp\u003e1\/4\"-20 Tie-Down Screw\u003c\/p\u003e\n\u003cp\u003e3\/8\"-16 Tie-Down Screw\u003c\/p\u003e\n\u003cp\u003eSachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet\u003c\/p\u003e\n\u003cp\u003eSachtler Mid-Level Spreader for FlowTech 75\u003c\/p\u003e\n\u003cp\u003e3 x Sachtler Rubber Feet for flowtech Tripod (Set of 3)\u003c\/p\u003e\n\u003cp\u003eSachtler Attachment Mount for flowtech 75 Tripod\u003c\/p\u003e\n\u003cp\u003eSachtler Carry Handle for flowtech 75\/100mm Tripod\u003c\/p\u003e","brand":"Sachtler","offers":[{"title":"Default Title","offer_id":51875176186023,"sku":"GC76-SCS2064S-FTMS","price":8316.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/4083\/0375\/files\/GC76-SCS2064S-FTMS-5.jpg?v=1794572166","url":"https:\/\/www.georges.com.au\/products\/sachtler-system-aktiv6-flowtech75-ms-scs2064s-ftms","provider":"Georges Cameras","version":"1.0","type":"link"}