Zip Money

SHOP
3 Legged Thing Punks Billy & AirHed Neo black
493

3 Legged Thing Punks Billy & AirHed Neo black

$493.00
  • Load Capacity: 40 lb
  • Maximum Height: 65"
  • Minimum Height: 7.8"
  • Folded Length: 17.7"
  • Leg Sections: 4
  • Weight: 3 lb
  • Reversible Column
  • Carbon Fiber Legs, Twist Locks
  • 32.5 to 67.5" Monopod-Convertible Leg
  • Bubble Levels, QR4 Quick Release Plate
SKU 3LT-BILLYBLACK
- +
Essential Accessories
Overview

3 Legged Thing Punks Billy & AirHed Neo black

With a predominantly black colour scheme, this Punks Series Billy Carbon Fiber Tripod with AirHed Neo Ball Head from 3 Legged Thing is a support system that features a tripod with a detachable leg and removable centre column, which can be combined to form a monopod with a 32.5 to 67.5" adjustable height. Cameras, lenses, or sport optics that are compatible with a 1/4"-20 mount can be connected to the included QR4 Quick Release Plate, which is secured to the AirHed Neo Ball Head using a quick-release clamp. The ball head is removable, provides up to a 90° tilt for portrait orientation, 360° of independent rotation, and can be locked into place along with its range of movement.

When configured as a tripod, it supports up to 40 lb and measures 17.7" when folded. Each of its 4-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. As a tripod, it can be set at a minimum height of 17.7", or 7.8" without its removable, push-and-pull, rapid centre column. Together, the three legs can be extended to obtain a maximum height of 55", or 65" when used with the centre column fully raised. To further enhance stability on a wide variety of surfaces, each of the carbon fibre legs includes a rubber foot.

For added versatility, the centre column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. A nylon tripod carry bag with a drawstring closure, as well as a microfiber ball head, carry bag are included for storage and transport.

 

Use and Handling

Support system with a removable ball head that features a tripod with a detachable leg and removable centre column, which can be combined to form a monopod with a 32.5 to 67.5" adjustable height

As a tripod, supports up to 40 lb

Push-and-pull, rapid centre column with ballast loop for rapid camera, lens, or sport optic positioning

Can be set for a minimum height of 17.7", or 7.8" without the centre column

All three legs can be extended in the tripod configuration to obtain a maximum height of 55", or 65", when used with the centre column fully, raised

Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them

Legs each feature 4 sections, twist locks for fast deployment, and can be independently spread

Legs can be locked at 23°, 55°, or 80° angles

Rubber feet help to enhance stability on a wide variety of surfaces

Weighs 3 lb and measures 17.7" when all three legs are reversed 180° and folded

Ball head provides up to a 90° tilt for portrait orientation, 360° of independent rotation, and can be locked into place along with its range of movement

Arca-type clamp on ball head to secure quick release plate

Included Toolz Multi-Tool with 4mm hex key, flathead screwdriver tip, as well as integrated carabiner and bottle opener, plus key chain

Hex key adjusts tension on leg hinges

Fasten or remove quick release plate from a device's accessory thread with hex key or flat head screwdriver tip

 

Construction Details

Carbon fibre legs with built-in bubble level

Removable, aluminium-alloy ball head with quick release clamp and dual, built-in bubble levels

Quick-release plate with 1/4"-20 mount and rubberized, anti-slip surface

Center column platform for ball head with three accessory eyelets as well as reversible, 3/8"-16 and 1/4"-20 mount

Included nylon drawstring carry bag for storage and transport of the tripod

Microfiber bag for storage and transport of the ball head

Specs
More Information
Brand 3 Legged Thing
Specifications

Head

Head Type Ball Head
Base Mount 3/8"-16 Female & 1/4"-20 with Bushing
Camera Mounting Screw 1/4"-20 Male
Number of Bubble Levels 2

General

Load Capacity 40 lb / 18.1 kg
Maximum Working Height 65" / 165.1 cm
Max Height without Center Column 55" / 139.70 cm
Minimum Working Height 7.8" / 19.8 cm
Folded Length 17.7" / 45 cm
Materials Aluminum Alloy, Carbon Fiber

Legs

Leg Lock Type Twist-Lock
Leg Positions 3 Positions
Independent Leg Spread Yes
Leg Sections 4
Leg Diameter 0.91" / 23.11 mm
Bubble Level Yes
Feet Features Rubber, Removable

Center Column

Center Column Features Ballast Hook
Center Column Sections 2
Center Column Extension Type Rapid
Lateral / 90-Degree Center Column No
Physical
Weight 3 lb / 1.4 kg
What's in the box

1x 3 Legged Thing Punks Billy & AirHed Neo black

1x AirHed Neo Ball Head

1x 3 Legged Thing QR4-EQ Quick Release Plate

1x 3 Legged Thing Toolz Multi-Tool

1x Ballast Loop

1x Tripod Bag

1x Ball Head Bag

What People are Saying
What's in the box

1x 3 Legged Thing Punks Billy & AirHed Neo black

1x AirHed Neo Ball Head

1x 3 Legged Thing QR4-EQ Quick Release Plate

1x 3 Legged Thing Toolz Multi-Tool

1x Ballast Loop

1x Tripod Bag

1x Ball Head Bag

Warranty