SKU: GC47-3LT-LEOKIT2

3 Legged Thing Leo 2.0 Tripod Kit with AirHed Pro Lever Ball Head

3 Legged Thing Leo 2.0 Tripod Kit with AirHed Pro Lever Ball Head

This bronze and blue 3 Legged Thing Tripod Kit includes a bronze Leo 2.0 Tripod and blue AirHed Pro Lever Ball Head. Together, the tripod and ball head form a support system that features three detachable legs and a removable centre column. With the ball head, each leg can be configured as a monopod with up to a 43.4" height or can be combined with the centre column to form a monopod with up to 59.2" in height.

Tripod heads such as the AirHed Pro Lever Ball Head that are compatible with a 3/8"-16 mount can be connected to the top of the Leo 2.0 Tripod. When combined and configured as a tripod, the Leo 2.0 Tripod and AirHed Pro Lever Ball Head supports up to 66.0 lb and measures 14.7" when folded. Each of the tripod's 5-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. The Leo 2.0 Tripod and AirHed Pro Lever Ball Head can be set at a minimum height of 8.2" when the tripod's 2-section, push-and-pull rapid centre column is removed. Together, the three legs can be extended to obtain a maximum height of 44.1" or 57.7" with the centre column fully raised along with the ball head. Each of the carbon fibre legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.

For added versatility, the Leo 2.0 Tripod's three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with strap is provided for storage and transport.

The AirHed Pro Lever Ball Head is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick-release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by using the clamp's push-and-pull cam lock lever. When opened, the lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right- or left-handed user.

Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations.

By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.

Tripod and Ball Head

The arca-type ball head and carbon-fiber tripod with 3/8"-16 mount

Tripod features three detachable legs and removable center column

With ball head, each leg can be configured as a monopod with up to a 43.4" height or can be combined with the center column to form a monopod with up to 59.2" height

Tripod configuration with ball head supports up to 66.0 lb

Push-and-pull center column for rapid camera, lens, or sport optic positioning

Center column D-ring to accommodate ballast for additional stability

Can be set for a minimum height of 21.7" or 8.2" without the center column

With ball head, all three legs can be extended in the tripod configuration to obtain a maximum height of 44.1" or 57.7" with the center column fully raised

Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them

Legs each feature 5 sections with twist locks for rapid deployment and can be independently spread

Legs can be locked at 22, 55, or 80° angles

Rubber feet help to enhance stability on a wide variety of surfaces

Weighs 4.1 lb and measures 14.7" when all three legs are reversed 180° and folded

Rubber feet can be removed and substituted with separately available 3

Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil

Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod

3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws

Ball head microfiber bag

Tripod kit carry bag with strap for storage and transport

AirHed Pro Lever Ball Head

Arca-type ball head with 88 lb load capacity

Compatible with tripods or support systems that feature a 3/8"-16 mount

Uses ball-and-socket joint to help maximize pan-and-tilt flexibility

The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place

Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position

Secondary locking knob with knurled surface allows head to rotate 360° Integrated clamp on top of on the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate

Push-and-pull cam lock lever to secure compatible Arca-type quick release plates within the integrated clamp

When opened, cam lock lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right or left-handed user

Built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations

Durable magnesium alloy construction

QR-OCTA Quick Release Plate

Compatible with Arca-type quick release clamps

1/4"-20 mount

Dual retaining screws along the underside of the plate prevent the plate from accidentally sliding off the AirHed Pro Lever Ball Head

Durable, aluminium alloy construction

Regular price $659.00
Sale price $659.00 Regular price $663.00
Pay with
Pay with
In Stock With Suppliers
Request a Price Match

Request a Price Match

Fill out the price match form below, and we will be in touch shortly.

$659.00

Product Overview

3 Legged Thing Leo 2.0 Tripod Kit with AirHed Pro Lever Ball Head

This bronze and blue 3 Legged Thing Tripod Kit includes a bronze Leo 2.0 Tripod and blue AirHed Pro Lever Ball Head. Together, the tripod and ball head form a support system that features three detachable legs and a removable centre column. With the ball head, each leg can be configured as a monopod with up to a 43.4" height or can be combined with the centre column to form a monopod with up to 59.2" in height.

Need advice?

Speak to one of our dedicated Australian-based sales team members.

Call us
Camera Review: The X100 VI we find out if it's worth the hype!

Camera Review: The X100 VI we find out if it's worth the hype!

2011 seems so long ago since Fujifilm sparked interest in a humble mirrorless rangefinder called the X100. Fast forward six generations, thirteen years, and the X100VI has been announced, reigniting the fanfare...

View post
The Best Reusable Film Cameras - Comparing Ilford, Yashica and Kodak!

The Best Reusable Film Cameras - Comparing Ilford, Yashica an...

If you have been looking for a more sustainable way of capturing photos instead of a disposable camera, then we recommend one of these top three reusable 35mm film cameras, as shown...

View post
What is the best Disposable Camera? - Comparing Yashica, Fuji & Kodak!

What is the best Disposable Camera? - Comparing Yashica, Fuji...

Disposable cameras have re-emerged as a popular choice for photographers at all levels. Far from being forgotten, these cameras have gained a following among those seeking a distinct and creative photographic experience. In our latest...

View post